Easy origami turtle: instruction with
Learn how to make an easy origami turtle with instructions.
Although this origami turtle looks pretty beautiful and amazing, it is actually surprisingly easy to make. Turtles that look nice tend to be very difficult to fold, and simple turtles, although simple enough to fold, look quite simple and not very cute. This origami turtle strikes with the perfect combination of ease of folding and beauty.
However, there is one tricky moment. The neck may seem a little tricky to work with, but we are confident that you will be able to handle it with simple and straightforward instructions. The rest is easy enough to fold.
Step 1: Take a square piece of paper.
Step 2: Fold the paper in half, then unfold.
Step 3: Fold the corners towards the center fold.
Step 4: Flip the paper over.
Step 5: Fold the edges so that they meet in the center and unfold again.
Step 6: Fold the bottom flaps towards the center as shown.
Step 7: Fold about 2/3 of the folded side back as shown in
Step 8: Fold the diamond in half.
Step 9: Fold about 3/4 pieces back.
Step 10: A little tricky point. Make a crease at the tip of the left triangle and slide the crease towards the center, then crush the parts of the head.
Step 11: Repeat on the right side.
Step 12: Flip the shape.
Step 13: Squeeze the sides of the tail together to create a hump on the shell. Make sure the peak of the hump is no more than half. Squeezing the tail, fold it to the side.
Step 14: Fold the tail under the body.
Step 15: Bend the corners on both sides to give the shell a rounded look.
Step 16: Bend only part of the tail back, allowing the base to lock the shell in place so the tip protrudes outward.
Step 17: Flip.
Step 19: Fold the lower legs and then half back towards the edge.
Step 20: Flip the turtle over and extend its legs a little so that it can stand. Done!
Modular origami. Turtle
How to make a turtle from modules
Modular origami for beginners. Turtle. Master class with step by step
How to make a paper turtle with your own hands
Turtle from modules. Master Class
We will tell you how to make a turtle from modules.
This craft can be made by children over 6 years old. This craft is simple and good for those who are just starting out in the art of origami.
DIY paper turtle. Manufacturing
We will use three paper colors to make the turtle: yellow, red and green. The size of one module in our case is 7.5 by 5 cm. (Modules can be made in a different size and in a different color)
Collect red, yellow, and green modules. You will find diagrams for assembling modules here.
1. Take 8 yellow modules for the first row, 9 red ones. For the second and connect these rows using Method 3 (see module mounting).
2. In the extreme pockets of the red row, insert one red module (one corner) with the long side up. One corner on each side should remain free. These are paw mountings (see).
3. In the next row, leave one free corner on each side and put on 8 red modules.
4. Fourth row: put on 1 red module on the two extreme red corners from the previous rows, then put on 1 yellow module, 2 red, 1 green, 2 red, 1 yellow and again. 1 red (see).
5. Leave one red corner free on each side and put on 1 red module, 1 yellow, 1 red, 2 green, 1 red, 1 yellow, 1 red,
6. In the sixth row, once again leaving one free corner on each side, put on 1 red module, 1 yellow, 1 red, 1 green, 1 red, 1 yellow, 1 red.
7. Next is a row of red and yellow modules: 1 red module, 1 yellow, 2 red, 1 yellow, 1 red.
8. In the next row (the outer corners are still free) put on 1 red module, 1 yellow, 1 red, 1 yellow, 1 red.
9. Ninth row: 1 red module, 2 yellow, 1 red.
10. Tenth row: 1 red module, 1 yellow, 1 red.
11. The next row consists of 2 red modules.
12. Finish the tortoise body 1 with a red module (see).
13. Make the turtle’s legs. To make each of them, you need to insert 5 red modules into each other with the long side up.
14. To make a head, insert 4 yellow 2 red modules into each other, slightly bend the neck (see).
15. Put your paws on the free corners (see point 2), insert the head into the center of the first row of the turtle’s body, glue the eyes.
How to make origami? Origami turtle. When asked how to make origami, we will answer: Simple! Origami turtle
Today we offer you to do with us origami turtle. The figurine is very simple to perform, but funny. Once again, we draw your attention to the usefulness of origami classes for children. First of all, for kids who are getting ready to go to school, who are engaged in the development of speech. After all, origami perfectly develops the fine motor skills of children’s fingers, which miraculously affects the child’s speech skills. In addition, it is very important for a kid to have a passion, to be able to somehow express himself, to have an activity that he likes and in which he sees his achievements and successes, his development. How to make origami? Simple enough! Watch our tutorial origami turtle.
Origami turtle. A few words about turtles
Now, traditionally, a few words about the heroine of the lesson. Turtles are amazing animals! They are sea and land, and land are subdivided into land and freshwater. Sea turtles are generally larger than their terrestrial counterparts. The largest are leatherback turtles, their shells are up to two meters long and weigh more than 900 kg. The smallest turtles are Namaqualand, their length does not exceed 10 cm.
Turtles in many countries and cultures personified such serious and eternal concepts as:
Universe (ancient myth says that the universe was held on the back of a turtle);
Longevity and immortality (turtles live 200-300 years);
Strength, patience, constancy, endurance, slowness (what a powerful shell they have, but how slow they are);
Water (many species live in water);
Lasting and calm peace, fertility.
The turtle is also a symbol of the contentment available. After all, the turtle carries everything with him, and this is not so much, the main thing is her house and her shield. At the same time, she looks absolutely calm and, as if, is happy with everything. The turtle also symbolizes patience. After all, she sometimes has to overcome her path for a very long time, but this demonstrates how important it is to be patient and carry out what she started to the end.
Are you still interested in how to make origami?
Then watch and do with us!
I wish you success in paperwork!
If you want to keep abreast of our news, subscribe to our blog news! Fill out the form below and receive our news to your email!
Friends! Don’t forget to share with your friends! Click on the social media buttons!
The sea turtle swims gracefully through the open sea, slowly moving its fins. This animal is familiar to all Japanese children thanks to the famous old fairy tale. When making the paper turtle figurine, be sure to tuck the corners of the shell inward to make the origami turtle look as much like the original as possible. And be careful when cutting the paper to make the front legs, the cuts should be centered and not cut into the carapace.
1 square sheet of paper, 15×15 cm
Place the paper face down with the shell drawing to the right. Fold the top corner of the paper down to the opposite corner, fold in a crease, and fold the model in half again, bending the right edge toward the left.
Pull up the top flap and open it, creating a square fold.
Flip the model upside down and repeat the square fold, giving the model a diamond shape. Now fold the lower sides of the top flap to the center marking line so that their edges touch at it.
Fold over the top triangle flap over the flaps made in the previous step, fold in a pleat and return the triangle flap to its original position. Now open up the narrow triangular flaps and bend their tips up to form a narrow diamond.
Lift the model and turn the back towards you, slightly opening the diamond-shaped flap. Using scissors, carefully cut the bottom of the rhombus along the center line to the point where the main body of the model begins. Then return the diamond valve to its original state.
Fold the incised parts of the diamond-shaped flap to the sides at an angle so that their tips are closer to the outer edges of the model. Now bend the top triangle as close to the turtle’s fins as possible and, stepping slightly up from the fold just laid, fold it back, carefully smoothing out the folds.
Turn out the folds of our origami turtle’s fins, straighten them out, and fold the corners inward, bringing the folds back into place.
Fold the side corners of the model towards the center line so that they touch the diagonal folds that extend to the bottom corner of the figure.
Open the top flaps, spreading the bottom corners in different directions, then accordion fold the corner of the middle part, forming a tail.
A wonderful origami turtle is ready!
We recommend that you look at how to make an origami turtle:
Turtle. Modular origami. Master class with step by step. Master class Turtle. Modular origami.
It turns out that turtles have existed on our planet for over 220 million years! Turtles are sea and land. In ancient times, the turtle was considered a model of the universe. Let us recall the idea of the ancients that the earth is held by three elephants that stand on a turtle. Some ancient peoples endowed the turtle with supernatural magical powers. And according to, fashionable today, Feng Shui turtle is a symbol of longevity, health, wisdom. In Feng Shui, you should place the turtle in the northern part of the apartment, and then you will be accompanied by good luck in your career and security in all matters.
To make such a turtle, you will need the following materials:
- 18 sheets of green office paper,
- 15 sheets of yellow office paper,
- Super glue.
How to make a turtle. Origami:
In total, you need to collect 288 green and 228 yellow modules. One module is assembled from 1/16 sheet of A4 paper (copier).
Carapace. The first and second rows of 6 green modules.
Third row. 12 green modules. On each corner of the second row module, we put one pocket on the third row module.
Fourth row. 12 yellow, 6 green modules. Each pair of yellow modules takes the place of one module.
Fifth row. You should alternate 3 yellow, 2 green modules. In this case, the total number of modules increases (see). There are 18 yellow, 12 green modules in total.
Sixth row without additions. 4 yellow, 1 green modules alternate. Yellows are worn on yellow, green on green. There are 24 yellow, 6 green modules in total.
Seventh row. 5 yellow, 2 green modules alternate. The number of modules increases (see). A total of 30 yellow, 12 green modules.
Eighth row. Modules are added (see). A total of 36 yellow, 12 green.
Ninth row. The number of modules is the same. A total of 36 yellow, 12 green.
Tenth row. 36 yellow, 12 green modules. The carapace should be bent like a hemisphere.
Eleventh row. 36 yellow, 12 green modules.
Twelfth row. 48 green modules. Modules should be worn back to front compared to the previous rows.
Head. The first and second rows of 6 green modules.
Turn the first two rows inside out.
Third row of 12 green modules.
The fourth row is 12 green modules.
The fifth row is 12 green modules. The head is ready.
Paws, tail. To begin with, you should evenly distribute the places for the paws and tail.
All four legs are assembled in the same way. Modules of the first row 3 modules are inserted into the gaps between the modules of the penultimate row of carapace.
Paw: first row 3 modules, second 4, third 3, fourth 4, fifth 3, sixth 2. And so all four paws.
Tail. The first row is 2 modules, the second is 3, the third is 2, the fourth is 1.
For strength, the head can be glued to the glue at the junction to the shell. The turtle is ready.
The colored paper turtle is a great choice for creating crafts for kindergarten or elementary school. It is created quickly and easily. Therefore, you can safely do it with your child. The turtle itself is a cute sea or land animal. Thanks to its paws, it can move around the water, and also go out onto land. She has a powerful carapace in which she can hide. However, there are some turtles that cannot do this! Therefore, not everyone has a protective house.
A paper turtle can fit in a child’s small hand, or it can be huge if you use a large sheet of paper in your work.
- A square sheet of green or brown paper;
Stages of making a turtle using origami technique:
Place the square sheet of paper with the corner up. Bend the upper part down in half.
Now we fold the right side of the folded square sheet to the left.
Bend the upper part of the triangle down.
Bring the folded part of the triangle back. In the fold, unfold the upper triangle and get a rhombus.
Bend the upper right corner down.
We open the corner back. Open the middle of the fold and get a rhombus. So we get the basis for the shell, from which we get the legs, head and tail of the turtle.
Start creating the head and upper legs. To do this, bend the sides of the rhombus to the center, and then the upper corner down.
We reveal the bent sides.
Take the bottom corner up with your fingers and get a long rhombus.
Cut with scissors in the middle of the rhombus to the middle.
To create the legs of the turtle, bend the upper parts of the rhombus to the sides.
Turn over. Create a fold at the top to make the turtle’s head.
Turn over again and bend the corners of the turtle’s legs.
We return the bent corners back and then place them inside the legs.
We bend the lower sides to the sides. So get another pair of turtle legs.
Let’s move on to making a small ponytail. To do this, bend the bottom corner up.
We retreat the distance and bend down the lowest corner. We get the tail.
Let’s slightly correct the shape of the shell itself. To do this, bend the side corners to the center of the tortoise’s body.
Turn over and get a finished paper craft in the shape of a turtle.
The size of the finished craft will depend on the parameters of the square sheet that was taken for work.